Mass Spectral Detection of Forward- and Reverse-Hydrogen/Deuterium Exchange Resulting from Residual Solvent Vapors in Electrospray Sources

Characterizing glycans is analytically challenging since glycans are heterogeneous, branched polymers with different three-dimensional conformations. Hydrogen/deuterium exchange-mass spectrometry (HDX-MS) has been used to analyze native conformations and dynamics of biomolecules by measuring the mass increase of analytes as labile protons are replaced with deuterium following exposure to deuterated solvents. The rate of exchange is dependent on the chemical functional group, the presence of hydrogen bonds, pH, temperature, charge, and solvent accessibility. HDX-MS of carbohydrates is challenging due to the rapid exchange rate of hydroxyls. Here, we describe an observed HDX reaction associated with residual solvent vapors saturating electrospray sources. When undeuterated melezitose was infused after infusing D₂O, samples with up to 73% deuterium exchange were detected. This residual solvent HDX was observed for both carbohydrates and peptides in multiple instruments and dependent on sample infusion rate, infusion time, and deuterium content of the solvent. This residual solvent HDX was observed over several minutes of sample analysis and persisted long enough to alter the measured deuterium labeling and possibly change the interpretation of the results. This work illustrates that residual solvent HDX competes with in-solution HDX for rapidly exchanging functional groups. Thus, we propose conditions to minimize this effect, specifically for top-down, in-electrospray ionization, and quench-flow HDX experiments.

Open image in new window

Graphical Abstract ?

     

Dynamics of the dispersion interaction in an energy transfer system

On the propagation of resonant radiation through an optically dense system, photon capture is commonly followed by one or more near-field transfers of the resulting optical excitation. The process invokes secondary changes to the local electronic environment, shifting the electromagnetic interactions between participant chromophores and producing modified intermolecular forces. From the theory it emerges that energy transfer, when it occurs between chromophores with electronically dissimilar properties, can itself generate significant changes in the intermolecular potentials. This report highlights specific effects that can be anticipated when laser light propagates across an interface between differentially absorbing components in a model energy transfer system.     

Coordination chemistry of a new P,Te-centred ligand: synthesis, NMR spectra and X-ray structures of M(TePPri2NPPri2)2 (M = Zn, Cd, Hg)

The lithiation of the monotelluride TePPri2NP(H)Pri2 (2) with BunLi at -78 degrees C results in the formation of the reagent [LiTePPri2NPPri2] (5), which was characterized by 31P NMR spectroscopy but not isolated due to disproportionation upon solvent removal. Salt metathesis reactions of 5, generated in situ, with group 12 metal chlorides produce the complexes M(TePPri2NPPri2)2 (6, M = Zn; 7, M = Cd; 8, M = Hg), which were characterized by single crystal X-ray diffraction, multinuclear NMR spectroscopy and thermal analyses. The X-ray structures reveal distorted tetrahedral structures with two P,Te-chelating anionic ligands [TePPri2NPPri2](-). The 31P NMR spectra exhibit second order behaviour that arises from an AA'XX' spin system; the spectra were simulated to determine the 31P, 31P spin-spin coupling constants.     

Effect of sorbed methanol, current, and temperature on multicomponent transport in nafion-based direct methanol fuel cells

The CO2 in the cathode exhaust of a liquid feed direct methanol fuel cell (DMFC) has two sources: methanol diffuses through the membrane electrode assembly (MEA) to the cathode where it is catalytically oxidized to CO2; additionally, a portion of the CO2 produced at the anode diffuses through the MEA to the cathode. The potential-dependent CO2 exhaust from the cathode was monitored by online electrochemical mass spectrometry (ECMS) with air and with H2 at the cathode. The precise determination of the crossover rates of methanol and CO2, enabled by the subtractive normalization of the methanol/air to the methanol/H2 ECMS data, shows that methanol decreases the membrane viscosity and thus increases the diffusion coefficients of sorbed membrane components. The crossover of CO2 initially increases linearly with the Faradaic oxidation of methanol, reaches a temperature-dependent maximum, and then decreases. The membrane viscosity progressively increases as methanol is electrochemically depleted from the anode/electrolyte interface. The crossover maximum occurs when the current dependence of the diffusion coefficients and membrane CO2 solubility dominate over the Faradaic production of CO2. The plasticizing effect of methanol is corroborated by measurements of the rotational diffusion of TEMPONE (2,2,6,6-tetramethyl-4-piperidone N-oxide) spin probe by electron spin resonance spectroscopy. A linear inverse relationship between the methanol crossover rate and current density confirms the absence of methanol electro-osmotic drag at concentrations relevant to operating DMFCs. The purely diffusive transport of methanol is explained in terms of current proton solvation and methanol-water incomplete mixing theories.     

A Hemilabile NHC-Gold Complex and its Application to the Redox Neutral 1,2-Oxyarylation of Feedstock Alkenes

We describe a Au^I complex of a hemi-labile (C^N) N-heterocyclic carbene ligand that is able to mediate oxidative addition of aryl iodides. Detailed computational and experimental investigations have been undertaken to verify and rationalize the oxidative addition process. Application of this initiation mode has resulted in the first examples of “exogenous oxidant-free” Au^I/Au^III catalyzed 1,2-oxyarylations of ethylene and propylene. These demanding yet powerful processes establish these commodity chemicals as nucleophilic-electrophilic building blocks in catalytic reaction design.     

Extraordinary circularly polarized luminescence activity exhibited by cesium tetrakis(3-heptafluoro-butylryl-(+)-camphorato) Eu(III) complexes in EtOH and CHCl3 solutions

The largest CPL activity ever measured was observed for cesium tetrakis(3-heptafluoro-butylryl-(+)-camphorato) Eu(III) complexes in EtOH and CHCl3 solutions substantiating the stereospecific formation of chiral Delta-SAPR-(C4) configuration with the aid of Cs+...FC (fluorocarbon) interactions more clearly than the exciton CD spectra.     

Accuracy of recent potential energy surfaces for the He-N2 interaction. II. Molecular beam scattering and bulk gas relaxation phenomena

A new semiempirical exchange-Coulomb model potential energy surface for the N(2)-He interaction was reported recently [A. K. Dham et al., J. Chem. Phys. 127, 054302 (2007)] and, using it, the temperature dependence of bulk gas properties of N(2)-He mixtures, such as the second virial coefficient and traditional transport phenomena, most of which depend primarily on the isotropic component of the interaction potential energy surface, was determined. Values of these properties, along with values calculated using two high-quality ab initio potential energy surfaces [C.-H. Hu and A. J. Thakkar, J. Chem. Phys. 104, 2541 (1996); K. Patel et al., ibid 119, 909 (2003)] were compared critically to available experimental data. The present paper reports on the ability of the same three potential energy surfaces to predict state-to-state and total differential cross sections, total integral cross sections, and the temperature dependence of bulk gas relaxation phenomena (including magnetic field effects on transport coefficients). While all three potential energy surfaces give total differential and higher speed integral scattering results that fall within the experimental uncertainties, integral scattering results and state-to-state differential cross section measurements consistently exceed the calculated values. All three surfaces give similar agreement with the relaxation properties of N(2)-He binary mixtures, with the semiempirical exchange-Coulomb model potential energy surface giving slightly better overall agreement with experiment than the two ab initio potential energy surfaces.     

Vibrational overtone initiated unimolecular dissociation of HOCH2OOH and HOCD2OOH: evidence for mode selective behavior

The vibrational overtone induced unimolecular dissociation of HMHP (HOCH(2)OOH) and HMHP-d(2) (HOCD(2)OOH) into OH and HOCH(2)O (HOCD(2)O) fragments is investigated in the region of the 4nu(OH) and 5nu(OH) bands. The unimolecular dissociation rates in the threshold region, corresponding to the 4nu(OH) band, exhibit measurable differences associated with excitation of the OH stretch of the alcohol versus the peroxide functional group, with the higher energy alcohol OH stretching state exhibiting a slower dissociation rate compared to the lower energy peroxide OH stretch in both HMHP and HMHP-d(2). Predictions using the Rice-Ramsperger-Kassel-Marcus theory give rates that are in reasonably good agreement with the measured dissociation rate for the alcohol OH stretch but considerably differ from the measured rates for the peroxide OH stretch in both isotopomers. The present results are interpreted as suggesting that the extent of intramolecular vibrational energy redistribution (IVR) is different for the two OH stretching states associated with the two functional groups in HMHP, with IVR being substantially less complete for the peroxide OH stretch. Analysis of the OH fragment product state distributions in conjunction with phase-space theory simulation gives a D(0) value of 38+/-0.7 kcal/mole for breaking the peroxide bond in HMHP.     

Analysis and deconvolution of dimethylnaphthalene isomers using gas chromatography vacuum ultraviolet spectroscopy and theoretical computations

An issue with most gas chromatographic detectors is their inability to deconvolve coeluting isomers. Dimethylnaphthalenes are a class of compounds that can be particularly difficult to speciate by gas chromatography – mass spectrometry analysis, because of their significant coelution and similar mass spectra. As an alternative, a vacuum ultraviolet spectroscopic detector paired with gas chromatography was used to study the systematic deconvolution of mixtures of coeluting isomers of dimethylnaphthalenes. Various ratio combinations of 75:25; 50:50; 25:75; 20:80; 10:90; 5:95; and 1:99 were prepared to test the accuracy, precision, and sensitivity of the detector for distinguishing overlapping isomers that had distinct, but very similar absorption spectra. It was found that, under reasonable injection conditions, all of the pairwise overlapping isomers tested could be deconvoluted up to nearly two orders of magnitude (up to 99:1) in relative abundance. These experimental deconvolution values were in agreement with theoretical covariance calculations performed for two of the dimethylnaphthalene isomers. Covariance calculations estimated high picogram detection limits for a minor isomer coeluting with low to mid-nanogram quantity of a more abundant isomer. Further characterization of the analytes was performed using density functional theory computations to compare theory with experimental measurements. Additionally, gas chromatography – vacuum ultraviolet spectroscopy was shown to be able to speciate dimethylnaphthalenes in jet and diesel fuel samples.     

Electrochemical determination of activation energies for methanol oxidation on polycrystalline platinum in acidic and alkaline electrolytes

The oxidation pathways of methanol (MeOH) have been the subject of intense research due to its possible application as a liquid fuel in polyelectrolyte membrane (PEM) fuel cells. The design of improved catalysts for MeOH oxidation requires a deep understanding of these complex oxidation pathways. This paper will provide a discussion of the literature concerning the extensive research carried out in acidic and alkaline electrolytes. It will highlight techniques that have proven useful in the determination of product ratios, analysis of surface poisoning, anion adsorption, and oxide formation processes, in addition to the effects of temperature on the MeOH oxidation pathways at bulk polycrystalline platinum (Pt(poly)) electrodes. This discussion will provide a framework with which to begin the analysis of activation energy (E(a)) values. This kinetic parameter may prove useful in characterizing the rate-limiting step of the MeOH oxidation at an electrode surface. This paper will present a procedure for the determination of E(a) values for MeOH oxidation at a Pt(poly) electrode in acidic and alkaline media. Values from 24-76 kJ mol(-1) in acidic media and from 36-86 kJ mol(-1) in alkaline media were calculated and found to be a function of applied potential and direction of the potential sweep in a voltammetric experiment. Factors that influence the magnitude of the calculated E(a) include surface poisoning from MeOH oxidation intermediates, anion adsorption from the electrolyte, pH effects, and oxide formation processes. These factors are all potential, and temperature, dependent and must clearly be addressed when citing E(a) values in the literature. Comparison of E(a) values must be between systems of comparable electrochemical environment and at the same potential. E(a) values obtained on bulk Pt(poly), compared with other catalysts, may give insight into the superiority of other Pt-based catalysts for MeOH oxidation and lead to the development of new catalysts which lower the E(a) barrier at a given potential, thus driving MeOH oxidation to completion.